xypex Kelly Tarltons Underwater World

Conrad Maldives Kelly Tarltons Underwater World & Spa

Tamaki Drive, Auckland

Xypex Admix C-1000 NF and Kuniseal C-31 waterstop were used to waterproof the new Stingray tank and filter plant room at Kelly Tarlton's. Xypex FCM 40 was also used as an extra measure for the concrete joints. Leaks through the ceiling which constitutes the road above, were plugged using Xypex Patch'n Plug, MPnP Mortar and Concentrate. Photos are provided courtesy of Thorburn Consultants and Kelly Tarlton's.

Country Products Banner

 

banner-country-products
  • xypex concentrate pail

    Concentrate

    Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete, either as a single coat or as the first of a two-coat application.

    It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

    Concentrate Product Data

    1
    406e3c61-4f4c-4398-ac26-2cf5f40c9c20
  • xypex admix pail

    Admix C-1000 NF

    Xypex Admix C-1000 NF is added to the concrete mix at the time of batching. Xypex Admix C-1000 NF consists of Portland cement and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.

    The Xypex Admix C-Series has been specially formulated to meet varying project and temperature conditions. Xypex Admix C-1000 NF is designed for concrete, where normal to a mild retarded set is desired.

    Admix C-1000 NF Product Data

    3
    46e25950-e625-414b-85f8-0c44bec12186
  • bio-aus

    Bio-San C500

    Xypex Bio-San C500 is a uniquely designed admixture for integral, long-term protection of concrete in harsh sewage conditions with high levels of H2S that cause microbial induced corrosion. Bio-San C500 combines potent antimicrobial protection along with the unique crystalline technology of the Xypex Admix C-Series.

    Bio-San C500 Product Data

    4
    41df6ef4-4fe6-6432-ba7c-ff0000137baf
  • xypex patch'n  plug pail

    Patch'n Plug

    Xypex Patch'n Plug is a specially designed, fast-setting, non-shrink, high-bond-strength, hydraulic cement compound for concrete patching and repair.

    Patch'n Plug stops flowing water in seconds and is used to seal cracks, tie holes, and other defects in concrete. The high performance characteristics of Patch'n Plug are enhanced by Xypex's unique crystalline waterproofing technology.

    Patch'n Plug Product Data

    6
    685315cd-0c0a-4a2c-beb4-b16e69e4ba26
  • xypex megamix pail

    Megamix I

    Xypex Megamix I is a thin parge coat for the waterproofing and resurfacing of vertical or masonry or concrete surfaces, as a cap coat for Xypex Concentrate, or as an architectural rendering.

    Megamix I is a unique blend of Portland cement, treated silica sand, fibers and proprietary chemicals. It is mixed with Xycrylic Admix to produce enhanced bond. Megamix I is applied by brush or trowel up to a thickness of 10 mm. The high performance characteristic of Megamix I are enhanced by Xypex's unique crystalline waterproofing and protection technology.

    Note: For patching or resurfacing deteriorated concrete, requiring a thicker application (between 10 mm to 50 mm) refer to the product data sheet for Xypex Megamix II.

    Megamix I Product Data

    7
    82598101-3b52-4075-b39e-f63c10a54232
  • xypex megamix pail

    Megamix II

    Xypex Megamix II is a high build repair mortar for the patching and resurfacing of deteriorated concrete.

    Megamix II has been specifically formulated to produce superior bond, low shrinkage, chemical durability and high strength. It is a one component mortar and can be either sprayed or trowel applied at a thickness of 10 mm to 50 mm. The high performance characteristics of Megamix II are enhanced by Xypex's unique crystalline waterproofing and protection technology.

    Note: For rehabilitation applications, where a thin parge coating (less than 10 mm) or a cap coat for Xypex Concentrate is required, refer to the product data sheet for Megamix I.

    Megamix II Product Data

    8
    1b24aff5-a2cd-41f1-b00e-cb3d2864fba8
  • mega bio aus

    Megamix II with Bio-San

    Xypex Megamix II + Bio-San is a resurfacing mortar specifically designed for the restoration of deteriorated concrete surfaces caused by microbial induced corrosion, abrasion/erosion and chemical attack. It is formulated for ease of application, superior bond, low shrinkage, high strength and resistance to microbial, acid and sulphate attack. Megamix II + Bio-San contains bioactive mineral solids which fix permanently within the repair mortar matrix impairing bio-film formation, thus limiting microbial induced corrosion of the repaired surface in sewer environments. It significantly extends the life of sewer and wastewater infrastructure by inhibiting the growth of acid causing sewer bacteria such as Thiobacillus that cause MIC (microbial induced corrosion). In most applications, such as manhole resurfacing, Megamix II + Bio-San can be used to replace epoxy linings and calcium aluminate repair mortars.

    Megamix II with Bio-San Product Data

    10
    c3df6ef4-4fe6-6432-ba7c-ff0000137baf
  • xypex restora-top pail

    Restora-Top 50, 100, 200

    Xypex Restora-Top products are designed specifically for the repair and rehabilitation of horizontal concrete surfaces such as warehouse floors, bridge decks, roads, curbs, and walkways where the repaired area must be returned to normal service within two hours of the completed repair.

    Restora-Top 50 Product Data
    Restora-Top 100 Product Data
    Restora-Top 200 Product Data

    12
    54df6ef4-4fe6-6432-ba7c-ff0000137baf
  • xypex xycrylic admix bottle

    Xycrylic Admix

    Xycrylic Admix is a water-based, high solids, polymer dispersion specifically designed for fortifying Portland cement compositions.

    This liquid is milky white in colour and improves curing qualities, enhances bond, imparts excellent water and weather resistance, and reduces shrinkage cracking. Xycrylic Admix is also used to fortify Xypex Patch'n Plug.

    Xycrylic Admix Product Data

    14
    e3b58fb6-682f-49f6-b277-a57437787113
Scroll to top