Richie Court

Bangkok

Wall structure and water tank on the roof of the new building in Bangkok are double-coated with Xypex products, a total coating area of 3,000 square meters (32,300 sq. ft.).

Country Products Banner

 
banner-country-products
  • Distributor

    Andrew Higgins

    Tel: +85587925188
    Send E-mail
  • xypex concentrate pail

    Concentrate

    Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete, either as a single coat or as the first of a two-coat application.

    It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

    Concentrate Product Data

    1
    cf2e6af4-4fe6-6432-ba7c-ff0000137baf
  • xypex modified pail

    Modified

    Xypex Modified can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to dampproof the exterior of foundation walls.

    Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where dampproofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

    Modified Product Data

    2
    be2e6af4-4fe6-6432-ba7c-ff0000137baf
  • xypex admix c-series pail box

    Admix C-500, C-1000, C-2000

    Xypex Admix is blended into the concrete mix at the time of batching to waterproof and protect concrete from the start. It outperforms other methods because of its unique ability to become a truly integral part of the concrete matrix. The Admix C-Series has been specially formulated to meet varying project and temperature conditions.

    Admix C-500 NF Product Data
    Admix C-1000 NF Product Data
    Admix C-1000 NF Product Data

    3
    b02e6af4-4fe6-6432-ba7c-ff0000137baf
  • xypex concentrate ds-series pail

    Concentrate DS-1

    Xypex Concentrate DS-1 is a special formulation designed specifically for a dry-shake application on horizontal concrete surfaces.

    Packaged in the form of a dry powder compound, Concentrate DS-1 consists of Portland cement, various active proprietary chemicals, and an aggregate which has been crushed and graded to particle sizes suitable for concrete floors. DS-1 becomes an integral part of the concrete surface thereby eliminating problems normally associated with coatings (e.g. scaling, dusting, flaking and delamination). The active chemicals react with the moisture of the fresh concrete causing a catalytic reaction which generates a non-soluble crystalline formation within the pores and capillary tracts of the concrete.

    Concentrate DS-1 Product Data

    4
    a22e6af4-4fe6-6432-ba7c-ff0000137baf
  • xypex patch'n plug pail

    Patch’n Plug

    Xypex Patch'n Plug is a specially designed, fast-setting, non-shrink, high-bond-strength, hydraulic cement compound for concrete patching and repair.

    Patch'n Plug stops flowing water in seconds and is used to seal cracks, tie holes, and other defects in concrete. The high performance characteristics of Patch'n Plug are enhanced by Xypex's unique crystalline waterproofing technology.

    Patch'n Plug Product Data

    5
    942e6af4-4fe6-6432-ba7c-ff0000137baf
  • xypex fcm 80 box bottle kit

    FCM 80

    Xypex FCM 80 is specifically designed for repairing cracks subject to movement, sealing construction joints, restoring deteriorated concrete, and waterproofing concrete structures.

    FCM 80 has exceptional adhesive and elongation characteristics and is often used in conjunction with the Xypex Crystalline Concrete Waterproofing and Protection System. FCM is a two component product consisting of a specialised liquid polymer dispersion and a cementitious powder. These components are mixed just prior to application.

    FCM 80 Product Data

    5
    862e6af4-4fe6-6432-ba7c-ff0000137baf
  • xypex gamma cure bottle

    Gamma Cure

    Xypex Gamma Cure is a curing agent designed specifically for Xypex crystalline waterproofing products. Gamma Cure may be used as an alternative to water curing for certain Xypex applications. It is also used to accelerate the Xypex Crystallization Process.

    Xypex Gamma Cure acts as an evaporation retardant by retaining the maximum amount of moisture in the Xypex coating. It also provides a catalyst for the reaction with the Xypex crystalline waterproofing treatment. It is a self-dissipating (2 - 3 days) non-film forming product.

    Gamma Cure Product Data 

    6
    772e6af4-4fe6-6432-ba7c-ff0000137baf
Scroll to top