Visit Our Global Site

For the Vietcombank Tower, Xypex products were applied by Bachy to repair defective concrete at all leakage points in the diaphragm wall construction joints and to seal all rebar penetration along the perimeter of the basement slab. The successful completion of these repairs in November 2012 resulted in the decision to use Xypex Concentrate to waterproof all four levels of diaphragm walls.

DISTRIBUTOR

Send E-mail
  • Concentrate

    Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above-grade or below-grade concrete, either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs.

    » Concentrate Product Data (A4)

    1
    42b60772-de78-47da-bc74-6b0c82fcc05f
  • Admix C-1000, C-1000 NF, C-2000, C-2000 NF

    Xypex Admix is blended into the concrete mix at the time of batching to waterproof and protect concrete from the start. It outperforms other methods because of its unique ability to become a truly integral part of the concrete matrix. The Admix C-Series has been specially formulated to meet varying project and temperature conditions.

    » Admix C-1000 Product Data
    » Admix C-2000 Product Data
    » Admix C-1000 NF Product Data (A4)
    » Admix C-2000 NF Product Data (A4)

    2
    68ac4b5f-6003-4c37-ad53-010082b05fa5
  • Patch'n Plug

    Xypex Patch'n Plug is a specially designed, fast-setting, non-shrink, high-bond-strength, hydraulic cement compound for concrete patching and repair. Patch’n Plug stops flowing water in seconds and is used to seal cracks, tie holes, and other defects in concrete.

    » Patch’n Plug Product Data (A4)

    3
    71b7b17f-486a-48bf-8c8f-0c91441f9de2
  • FCM 80

    FCM 80 is specifically designed for repairing cracks subject to movement, sealing construction joints, restoring deteriorated concrete, and waterproofing concrete structures. FCM is a two component product consisting of a specialized liquid polymer dispersion and a cementitious powder. These components are mixed just prior to application.

    » FCM 80 Product Data (A4)

    4
    37e5d79e-1141-4aa2-aa8b-0ee946c24813
  • Xycrylic Admix

    Xycrylic Admix is a water-based, high solids, polymer dispersion specifically designed for fortifying portland cement compositions. This liquid is milky-white in color and improves curing qualities, enhances bond, imparts excellent water and weather resistance, and reduces shrinkage cracking. Xycrylic Admix is also used to fortify Xypex Patch'n Plug.

    » Xycrylic Admix Product Data (A4)

    5
    35650a90-090b-479e-840b-4adec529b0f5
  • Megamix I

    Xypex Megamix I is a thin parge coat for the waterproofing and resurfacing of vertical or masonry or concrete surfaces, as a cap coat for Xypex Concentrate, or as an architectural rendering. 

    » Megamix I Product Data (A4)


    5
    3ec155a3-881e-4e9e-9e7c-8a1e2e1dbbd9
  • Quickset

    Xypex Quickset is a water-soluble liquid blend of silicates, neutralizers and penetrating agents specially compounded to harden, dustproof and seal the surfaces of fresh or newly cured concrete floors. Applied to the concrete surface, Xypex Quickset penetrates into the capillaries of the concrete substrate and chemically reacts with the free lime and calcium carbonate to form a hard, insoluble gel within the pores, thus closing off the small voids. Quickset provides superior hardening and a dustproof finish.

    » Quickset Product Data (A4)

    6
    b678b8a3-37c9-4973-b7b9-68774177fce3