Download Schematic Drawings (PDF)

 

Select a schematic drawing:
Construction Joint - Walls & Slabs
Construction Joint - Walls/Slab Interface
Concrete Wall and Slab - Below Grade
Foundation Wall - Inside Application
Retaining Wall
Concrete Block Wall - Below Grade
Concrete Block Wall - Above Grade
Parking Deck
Roof/Plaza Deck
Elevator Pit/Sump Pit
Planter
Tunnel
Swimming Pool
Sewage Plant Clarifier Tank
Sewage Plant Digester Tank
Reservoir/Wet Well
Underground Vault/Dry Well
Precast Concrete Manhole
Standard Metal Pipe Detail
Ferro-Cement Boat, Caisson, Floating Dock
Bridge
 
Print Friendly Version
Download as PNG
Download as PDF

1. Apply Xypex Concentrate slurry to the groove at the rate of 1.5 lb./sq. yd. (0.8 kg/m2).

2. Fill groove to surface with Xypex Concentrate in Dry-Pac form and pack tightly. Brush Dry-Pac liberally with water and apply a Xypex Concentrate slurry over the Dry-Pac at the rate of 1.5 lb./sq. yd. (0.8 kg/m2).

Note 1: Schematic diagram shows Xypex application details only and does not depict standard requirements for waterstops or expansion joint sealants.

Note 2: Schematic drawing shows Xypex Coating application. Specifier may consider the alternative use of Xypex Dry Shake (DS-Series) or Xypex Additive (Admix C-Series), where applicable. Refer to Standard Specifications for more information.