|
|
|
|
|
 |
 |
|
|
1. Joint Waterproofing:
Clean joint thoroughly. Between pours, apply Xypex Concentrate slurry to joint surfaces at the rate of 2.0 lb./sq. yd. (1.0 kg/m2).
|
2. Sealing Strip
Clean pre-formed groove thoroughly. Apply Xypex Concentrate slurry to groove at the rate of 1.5 lb./sq. yd. (0.8 kg/m2). Fill groove with Xypex Concentrate Dry-Pac and pack tightly. Pre-formed groove may be offset to either side of joint.
Note 1: Schematic diagram shows Xypex application details only and does not depict standard
requirements for waterstops or expansion joint sealants.
Note 2: Schematic drawing shows Xypex Coating application. Specifier may consider the
alternative use of Xypex Dry Shake (DS-Series) or Xypex Additive (Admix C-Series), where
applicable. Refer to Standard Specifications for more information.
|
|
|
| |
|
Print Friendly Version
Download as PNG
Download as PDF