1.Between pours, apply Xypex Concentrate slurry to all joint surfaces at the rate of 2.0 lb./sq. yd. (1.0 kg/m²).

2.In sealing strip, apply one slurry coat of Xypex Concentrate at the rate of 1.5 lb./sq. yd. (0.8 kg/m²), then fill slot to surface with Xypex Concentrate in Dry-Pac form.

3.To pool deck and all interior wall and floor surfaces, apply one slurry coat of Xypex Concentrate at a rate of 1.25 to 1.5 lb./sq. yd. (0.65 to 0.8 kg/m²). After the Concentrate has set but while it is still “green”, apply a coat of Xypex Modified at a rate of 1.25 to 1.5 lb./sq. yd. (0.65 to 0.8 kg/m²). In new construction, Xypex Concentrate DS-1 is recommended for pool deck and floor surfaces. Please refer to product data sheets.

Note 1: Schematic diagram shows Xypex application details only and does not depict standard requirements for waterstops or expansion joint sealants.

Note 2: Schematic drawing shows Xypex Coating application. Specifier may consider the alternative use of Xypex Dry Shake (DS-Series) or Xypex Additive (Admix C-Series), where applicable. Refer to Standard Specifications for more information.