Visit Our Global Site

Two Sunset Water Villa Pools, nestled within a tidal coral reef, were built for the Conrad Maldives Resort and Spa on Rangali Island in the Maldives. As durability and protection of the steel reinforcing was a major consideration, 165 kg of Xypex Admix C-1000 NF combined with MS 600 (Microsilica) was specified to provide this protection.

DISTRIBUTOR

Send E-mail
  • Xypex Project

    Blenheim Aquatic Centre

    Blenheim 450 kg Xypex Admix C-1000 NF, along with 1000 m of Kuniseal C-31DS waterstop, were utilised as the waterproofing system for the pools and balance tanks in this large Aquatic centre. The centre serves as part of a major sporting complex in the heart of Blenheim. Pull-off adhesion tests were performed by Mapei, who were supplying the tiles to be stuck to the Xypex treated concrete, and these proved appropriate adhesion could be achieved using their cementitious adhesives combined with a latex compound. A Mapei epoxy adhesive was also tested with excellent results, as expected.
  • Xypex Project

    Kelly Tarltons Underwater World

    Tamaki Drive, Auckland Xypex Admix C-1000 NF and Kuniseal C-31 waterstop were used to waterproof the new Stingray tank and filter plant room at Kelly Tarlton's. Xypex FCM 40 was also used as an extra measure for the concrete joints. Leaks through the ceiling which constitutes the road above, were plugged using Xypex Patch'n Plug, MPnP Mortar and Concentrate. Photos are provided courtesy of Thorburn Consultants and Kelly Tarlton's.
  • Xypex Project

    Parnell Baths

    Parnell, Auckland Approx. 1,260 kg Xypex Admix C-1000 NF, 16 tonnes of Denka CSA and MS600 were combined to provide a shrinkage compensated, waterproof and durable floor slab as part of the Parnell Baths upgrade. The floor was poured as two slabs, with two new in-situ cast end walls containing Xypex Admix and MS600 completing the new structures. During 2009, Xypex Patch'n Plug was used to stem water flow through the old seawall of the balance tank under the wooden decking, while the common pool wall within the balance tank was coated with two coats of Xypex Concentrate/Gamma Cure to address fine cracks and extend the serviceable life of this popular seawater pool. This was performed by Aquastop and specified through GHD.
  • Xypex Project

    Tepid Baths Renovation

    Auckland Xypex Admix C-1000 NF was specified into the pool and concourse concrete in combination with MS600 for pool waterproofing and steel durability for this salt water pool located in an area of tidal uplift and high ground salinity. 2,089 kg of Xypex Admix was dosed into 431.8 m3 of 50 MPa concrete for the balance tank, children's and main pool concrete and concourse areas.
  • Xypex Project

    Selwyn Aquatic Centre

    Selwyn District, Rolleston 2,148 Kgs Xypex Admix C-1000 NF was specified into the 40 MPa pool floors, walls, balance tanks and concourse concrete for this new pool to service the Selwyn District Council, just South of Christchurch. 83.4 m3 of precast concrete was included (supplied via Smith Crane Precast) with the bulk of the in-situ cast concrete comprising 731.6 m3. A waterstop was applied to associated construction joints via Adhesion Sealing. Some areas of more aggressive chemical action utilised the combination of Xypex Admix with MS600 for enhanced durability and waterproofing. Adhesion sealing subsequently applied a coat of Xypex Gamma Cure/Concentrate/Gamma Cure to 362 m2 of concrete drainage pipes servicing the pool complex.
  • Xypex Project

    Auckland Parking Structure

    Auckland Xypex Concentrate was used to waterproof the parking decks, parkades and walkways of this waterfront facility.
  • Xypex Project

    Viaduct Harbour

    Auckland Eight projects from 1998 through 2003 used Xypex Admix and Xypex Concentrate to waterproof basement areas and liftpits. Xypex was also added insitu to precast and shotcrete concrete structures. The projects included apartments, carparks and a sewage pump station.