Forums / Xypex Installation, Application & Repairs / Xipex 1000 or 2000 dosage
Back to Previous Page

  • Install Content Image

    Re: Xipex 1000 or 2000 dosage

    1 posts, 0 answered
    1. sambigotes avatar

      Hi everybody
      According to the exclusive distribuitor of Xipex in Mexico there is only available Xipex 2000 as admixture for concrete, we know our needs are full covered if we use Xipex 1000 and we can import it from San Diego,  is it posible to use Xipex 2000 in half of dosage stated in the data sheet??

      Posted on 05 Aug 2013
    2. Jim Caruth avatar

      Jim Caruth

      C-1000 may be dosed at 2% (for waterproofing) and up to 3% (for waterproofing and chemical protection) by weight of the self cementing materials in the mix, typically the cement and slag.  C-2000 should only be dosed to a 2% maximum due to the extended delay set.  We strongly recommend that you confirm dosage with a Xypex technical representative after your mix design has been finalized.
      Note that you might want to contact our Area Manager for Central and South America:  Mauricio Davila - - 52-1-55-1904-5181.  As you can see, Mauricio is located in Mexico and he may have some recommendations in terms of sourcing Xypex products.
      Posted on 08 Aug 2013

This site contains user submitted content, comments and opinions and is for informational purposes only. Xypex disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Xypex Support Communities Terms of Use.