Visit Our Global Site

A two-coat application of Xypex Concentrate and Modified was used to waterproof the roof deck and ground-water reservoir. Xypex Dry-Pac was applied to the construction joints and Xypex Concentrate was used to waterproof all bathrooms.

DISTRIBUTOR

Send E-mail
  • Concentrate

    Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete, either as a single coat or as the first of a two-coat application.

    It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

    » Concentrate Product Data (AUS)

    1
    eb87b298-4836-4cfb-b3cd-6b7d155e9981
  • Admix C-1000 NF

    Xypex Admix C-1000 NF is added to the concrete mix at the time of batching. Xypex Admix C-1000 NF consists of Portland cement and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.

    The Xypex Admix C-Series has been specially formulated to meet varying project and temperature conditions. Xypex Admix C-1000 NF is designed for concrete, where normal to a mild retarded set is desired.

    » Admix C-1000 NF Product Data (AUS)

    2
    fba70102-044c-47f8-95ca-933ea3303714
  • Admix C-5000

    Xypex Admix C-5000 is a unique chemical treatment that has been specially formulated to enhance the durability of reinforced concrete exposed to aggressive conditions. Xypex Admix C-5000 is added to the concrete mix at the time of batching.

    Xypex Admix C-5000 is a powdered additive consisting of Portland cement and various active proprietary chemicals. These active chemicals react with the moisture in fresh concrete and the by-products of cement hydration to cause a catalytic reaction which generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete. The reaction products of Xypex Admix C-5000 are in mineral crystal form and prevent the penetration of deleterious ions into ordinary Portland cement concrete, fly ash concrete and slag cement concrete with equal effect. Research work in Australia, Canada and Japan has demonstrated that the Xypex C-Series Admix enhances the ability of concrete to resist sulphate attack, limits chloride ion penetration, improves the chemical resistance of reinforced concrete and accelerates autogenous healing of cracks.

    » Admix C-5000 Product Data (AUS)

    3
    08bb9657-252c-44ee-aa79-7e4fd5e5250f
  • Concentrate DS-1

    Xypex Concentrate DS-1 is a special formulation designed specifically for a dry-shake application on horizontal concrete surfaces.

    Packaged in the form of a dry powder compound, Concentrate DS-1 consists of Portland cement, various active proprietary chemicals, and an aggregate which has been crushed and graded to particle sizes suitable for concrete floors. DS-1 becomes an integral part of the concrete surface thereby eliminating problems normally associated with coatings (e.g. scaling, dusting, flaking and delamination). The active chemicals react with the moisture of the fresh concrete causing a catalytic reaction which generates a non-soluble crystalline formation within the pores and capillary tracts of the concrete.

    » Concentrate DS-1 Product Data (AUS)

    4
    3d1b65af-c25b-4823-8ad7-007c19844386
  • Modified

    Xypex Modified can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to dampproof the exterior of foundation walls.

    Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where dampproofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

    » Modified Product Data (AUS)

    4
    32bc0cd8-5220-4dcd-9192-69ef73dba24a
  • Patch'n Plug

    Xypex Patch'n Plug is a specially designed, fast-setting, non-shrink, high-bond-strength, hydraulic cement compound for concrete patching and repair.

    Patch'n Plug stops flowing water in seconds and is used to seal cracks, tie holes, and other defects in concrete. The high performance characteristics of Patch'n Plug are enhanced by Xypex's unique crystalline waterproofing technology.

    » Patch'n Plug Product Data (AUS)

    6
    ed6589de-74fe-457d-b41a-18ae45bff008
  • Megamix I

    Xypex Megamix I is a thin parge coat for the waterproofing and resurfacing of vertical or masonry or concrete surfaces, as a cap coat for Xypex Concentrate, or as an architectural rendering.

    Megamix I is a unique blend of Portland cement, treated silica sand, fibers and proprietary chemicals. It is mixed with Xycrylic Admix to produce enhanced bond. Megamix I is applied by brush or trowel up to a thickness of 10 mm. The high performance characteristic of Megamix I are enhanced by Xypex's unique crystalline waterproofing and protection technology.

    Note: For patching or resurfacing deteriorated concrete, requiring a thicker application (between 10 mm to 50 mm) refer to the product data sheet for Xypex Megamix II.

    » Megamix I Product Data (AUS)

    7
    eba82949-f07f-4192-ba4f-e96e98f34f0a
  • Megamix II

    Xypex Megamix II is a high build repair mortar for the patching and resurfacing of deteriorated concrete.

    Megamix II has been specifically formulated to produce superior bond, low shrinkage, chemical durability and high strength. It is a one component mortar and can be either sprayed or trowel applied at a thickness of 10 mm to 50 mm. The high performance characteristics of Megamix II are enhanced by Xypex's unique crystalline waterproofing and protection technology.

    Note: For rehabilitation applications, where a thin parge coating (less than 10 mm) or a cap coat for Xypex Concentrate is required, refer to the product data sheet for Megamix I.

    » Megamix II Product Data (AUS)

    8
    681bf747-b320-43e1-ae73-9f81c0a3b083
  • FCM 80

    Xypex FCM 80 is specifically designed for repairing cracks subject to movement, sealing construction joints, restoring deteriorated concrete, and waterproofing concrete structures.

    FCM 80 has exceptional adhesive and elongation characteristics and is often used in conjunction with the Xypex Crystalline Concrete Waterproofing and Protection System. FCM is a two component product consisting of a specialised liquid polymer dispersion and a cementitious powder. These components are mixed just prior to application.

    » FCM 80 Product Data (AUS)

    10
    dc89ff1d-ae01-46ea-9380-9138cc8def3b
  • Gamma Cure

    Xypex Gamma Cure is a curing agent designed specifically for Xypex crystalline waterproofing products. Gamma Cure may be used as an alternative to water curing for certain Xypex applications. It is also used to accelerate the Xypex Crystallization Process.

    Xypex Gamma Cure acts as an evaporation retardant by retaining the maximum amount of moisture in the Xypex coating. It also provides a catalyst for the reaction with the Xypex crystalline waterproofing treatment. It is a self-dissipating (2 - 3 days) non-film forming product.

    » Gamma Cure Product Data (AUS)

    11
    8c7f62b7-3125-4f9b-b0c8-e5284596dd99
  • Xycrylic Admix

    Xycrylic Admix is a water-based, high solids, polymer dispersion specifically designed for fortifying Portland cement compositions.

    This liquid is milky white in colour and improves curing qualities, enhances bond, imparts excellent water and weather resistance, and reduces shrinkage cracking. Xycrylic Admix is also used to fortify Xypex Patch'n Plug.

    » Xycrylic Admix Product Data (AUS)

    12
    2582f991-bf0d-4771-9ece-7c2cc96acee9
  • Quickset

    Xypex Quickset is a water-soluble liquid blend of silicates, neutralizers and penetrating agents specially compounded to harden, dustproof and seal the surfaces of fresh or newly cured concrete floors.

    Applied to the concrete surface, Xypex Quickset penetrates into the capillaries of the concrete substrate and chemically reacts with the free lime and calcium carbonate to form a hard, insoluble gel within the pores, thus closing off the small voids. Quickset provides superior hardening and a dustproof finish.

    » Quickset Product Data (AUS)

    13
    7f028228-995d-4010-8fd1-f596ada20d29